You will also gain speed warning via the same menu. Then in radio CAR menu go to Instrument cluster, On-board computer 1/2 and set all the entries to No, except the one you wish to display on the DIS (since without the stalk controls you can not scroll them).
Enabling trip computer without the trip computer controls in wiper stalkĮnabling trip computer without the trip computer controls in wiper stalk: In 56-Radio (this part of the tip is for radios not MMI) check byte 9, bit 6 (board settings active?) and in 17-Instruments check byte 1, bit 2 (DIS active).
#Audi radio code herausfinden software
Ross-Tech has updated their VCDS/VAG-COM software data to include relevant bits with descriptions, so you can more easily try different combinations. This probably has to do with equipment levels. It was reported by -V- (here in Finnish: ) that 4C won’t work in some cars, but value 44 instead does. Without memory seats it is currently not known if the tilt can be adjusted, it seems to default to a standard amount according to reports (see links below, thanks to EuroDan and Unisurfer). Afterwards when reversing and the mirror knob is in passenger position the passenger side mirror will tilt while on reverse to better show the curb. If the byte has value 50 (cars with folding or folding/dimming mirrors), change it to 5C. If the byte has value 40 (cars without electrically folding mirrors), change it to 4C. This may require that factory alarm is installed on the car! Enabling reverse mirror tilt on cars without memory seatsĮnabling reverse mirror tilt on cars without memory seats: Go to module 52 Door Elect, Pass., Long Coding, Byte 4. Just make sure you have the latest VCDS/VAG-COM updates installed and check/uncheck the checkbox Anti-Theft-System: Horn Confirmation active in 46 Central Conv., Long Coding, Byte 01, Bit 2. models that beep by default (and vice-versa of course). Setting both bits 0 and 1 from 0 to 1 results in an ”S” logo.Įnabling/disabling doors locked/alarm armed soundĮnabling/disabling doors locked/alarm armed sound: It is possible to enable the beep the car makes when locking doors in European models and likely to disable the beep in U.S. Looks like 65535 should enable everything, Ambiance lighting, Adaptive cruise, etc that I don’t have, but so far nothing seems wrong - the menus for things I don’t have just don’t show up.Ĭhange radio Concert/Symphony splashscreen: According to capvag at ( ) changing in module 56 – Radio byte 12, setting bit 0 from 0 to 1 results in an ”S5” logo on the splashscreen (the startup screen on the radio), setting bit 1 from 0 to 1, results in an ”RS” splashscreen. I went from 65519 to 65535 and it enabled the battery level meter.
Ross-Tech has some help for the values - you should be able to add 16 to what you now have to enable the battery menu under ”CAR”. Last night I was poking around and found you can enable it by going to 56 – Radio, Adaptation, then select ”Car menu Options 1”. He also suggests to try the value 65535 for all options in the menu, including oil level if your hardware supports it. Battery and oil level for radio Chorus/Concert/Symphony: B8_Jim reports at that by going to 56 – Radio, Adaptation, Car menu Options 1 add +16 to the value there to enable battery level in the CAR menu.
0 kommentar(er)
